| Benefits For Multiple Weld Head Welding Systems
|
Benefits For Single Head Pedestal Welders
|
| Any program can be selected by use of a binary code input, or operate in a chain automatically with a single initiation |
Allows welding of a complete part in one handling |
| Makes up to 45 welds or sequences in each programmed chain |
Provides virtually unlimited welding sequences |
| Sequences 4 (expandable to 16) solenoid valves in any order |
Makes up to 45 welds in a programmed chain |
| * Welds with any of up to 15 SCR contactors in any sequence |
Can use same individual program unlimited times for fast programming and editing |
| Checks open or closed condition of 5 pressure/limit/proximity switches |
Provides proper weld schedule for each weld from 70 in memory |
| Can operate up to 15 chains as selected by switch input |
Controls 4 (expandable to 16) solenoids for clamp, retract, slide, etc. |
| Allows use of same individual program unlimited times. |
Monitors up to 5 limit/pressure/proximity switches |
| A different weld schedule can be used for every weld from 70 in memory. |
* Has a differential pressure transducer to wait for correct tip force prior to the start of each weld |
| Counts complete finished parts |
Counts complete finished parts |
| * Monitors up to 16 Differential Pressure Transducers |
Can utilize three double level foot switches to select three completely different chains |
| Contains Anti-tiedown/Anti-repeat system for use with double hand switch operation |
Contains Anti-tiedown/Anti-repeat system for use with double hand switch operation |
| Operates a water saver solenoid for 1 minute after last weld |
Operates a water saver solenoid for 1 minute after last weld |
| Sends a signal at the end of each complete chain (EHR) |
Controls Intensifier functions |
| Controls Intensifier functions |
* Monitors and reacts to secondary welding current |
| * Monitors and reacts to primary or secondary welding current |
* Prints data and fault indication on each weld |
| * Prints data and fault indication on each weld |
* Prints data and fault indication on each weld |
| * Contains up to 16 independent computerized steppers |
* Increases welding heat on a computerized curve for welding of galvanized steel |
